Method 1 : Matching Process

Procedure

WRSM = Bluetooth Microphone

• Confirm power supply
  Confirm that the host and the WRSMIt's on.
  On first boot up: WRSM will ask the user to select a language or a tone, and then it will automatically enter pairing mode.Select your preferred language and press PTT.
  • (1) English (2) French (3) Non-language (prompts PTT only)
• Maintain matching distance
  Make sure the distance between the WRSM and the host is within 1 meter for successful pairing.
• Successful Pairing Tips
  When the device is successfully paired, the WRSM will play the "Pairing Successful" tone. maybe "Connecting" Voice GuidanceThe
• Start Connection
  When listening to WRSM playback "Ringing ToneThe representative host is asking for a connection.
  At this point, press 2 times "Turn on the key."to start the connection process.
• Confirmation of successful connection
  When the WRSM is successfully connected to the host computer, there will be a corresponding tone/indication display (see Figure 1. below).
• Completion of Matching
  Your WRSM has been successfully connected and is now ready to use.

Method 2 : Reset the microphone settings / and pairing to a new microphone

1. Enter Matching Mode
   • Make sure that WRSM is off, then press and hold the PTT key + Power keyuntil you hear the voice prompts:"Motorola Solution Power On" → "Cleared" → "Searching for Host"
2. Cell phone search and connection
   • In the phone's Bluetooth settings, search for and select the Bluetooth Microphone Make a connection.
3. Completion of Matching
   • After successful connection, the Bluetooth microphone will start playing music. At this point, press the Power buttonYou can hear the voice prompts:"Connected"

Frequently Asked Questions

• Can't find the device/repeatedly can't connect: Bring the two within 1 meter of each other and on the car/phone "Delete " old Bluetooth records; "Press and hold the PTT and Power On buttons" to allow RSM to re-pair.
• Connected but no sound or cannot fire.: Verify that the car/cell phone has Bluetooth audio/accessory settings enabled, that the firmware supports Wireless RSM, and that the model number is MOTOTRBO (XPR/DP/e Series) Compatible Operations-Critical RSM(APX requires the corresponding Mission-Critical version).

Figure 1.

Status	LED Indicator	tone cue	Voice Guidance
Enter Matching Mode	Blue LED blinking	-	"Cleared."
Not yet paired	Blue LED blinking	Matching Ready Tone	"Searching for Host."
Pairing Successful	Blue LED constant on for 2 seconds	Pairing Successful Beep	"Connecting."
Establish wireless connection with the host	Blue LED heartbeat mode (long time off, short time on)	Connected Tone	"Headset Connected."

Indicator Light Meaning